|Login||Logout||Register||Contact the Webmaster||PayPal Me|
Pans needed: 1 10-inch cast iron skillet
Take down your smoke detector. This method produces a lot of smoke!
I'm about to reveal a dirty secret they don't tell you about cast iron cooking. There are at least a thousand videos out there on YouTube, all saying how you can get a wonderful steak when you sear it in a blazing hot cast iron pan. And they're right, too – you get a wonderful tasting steak that rivals anything cooked in a restaurant. However, there's a danger to cooking a steak this way that you need to know about, but almost none of those videos tell you. If you've never cooked a steak in a hot cast iron pan, then there are two things you need to know.
Nearly every recipe for pan-seared steak will tell you to heat up your iron pan. They'll say, "Get your pan hot! Screaming hot! Blazing hot!" That's certainly true…BUT, it's actually possible to heat up your pan too hot, even on an electric stove. If you let let a cast iron pan sit on a stovetop range at its highest setting, it's going to keep absorbing heat and getting hotter and hotter and hotter…until it can actually become TOO HOT. What's needed here is temperature control. You want your pan good and hot, so as to give your steak a good sear. However, you also want to keep it under control to avoid setting your stovetop on fire!
The method to do so is to keep your cast iron pan dry – don't add oil to it. Instead, put the oil on the steak itself, so that the hot iron will give it a good crust.
Place the cast iron skillet in your oven and turn the heat to 500 degrees (F) to preheat. Wait until your oven reaches 500 degrees before seasoning your steak. In order to avoid the salt taking the juice out of the steak, it's important to salt your steak right before you put it in the pan – don't wait too long and leave the salt on the uncooked steak. When the oven reaches 500 degrees, put the steak onto the dry plate, and coat each side of the steak with a brushing of olive oil. From there, add a generous amount of kosher salt; flip the steak and salt both sides. Most of the salt will burn on the pan and produce a crust – which is exactly what is supposed to happen – so don't be afraid to add a lot of salt to the steak. Finally, add a coating of cracked pepper.
Turn on your stovetop burner to its highest setting. When the stovetop is ready, take the pan out of the oven (with heavy gloves!) and place it on the burner. Use tongs to place the steak into the pan – don't use your hands. Don't risk burning your hands on that hot iron pan!
The steak will begin smoking immediately when it hits the hot iron. Be ready for a lot of smoke – your entire home will fill with smoke when you cook a steak in this manner. Be sure the smoke detector is taken down.
Sear the steak for 2 minutes on the first side. DO NOT poke, prod, or move the steak as it is searing – it will develop a blackened crust. This is exactly what is supposed to happen. Flip the steak and sear the other side for only 2 minutes, then take the entire pan and place it in the oven. Turn off your stovetop burner.
Keep the steak in the oven for 3 minutes, then take the pan out (with heavy gloves!), flip the steak, and place it back into the oven. Cook the second side for another 3 minutes. Take the pan out of the oven, put it on your stovetop (remember, it's still blasting hot!), and use tongs to place the steak onto your dry plate.
Deglaze the hot pan: pour a tablespoon of balsamic vinegar into the pan, where it will sizzle and bubble. Use heavy gloves to lift the pan, and with a metal spatula scrape all of the drippings from the pan onto the steak.
Cover the steak loosely with a piece of foil. Wait 10 minutes. This will result in a wonderful medium rare steak.
(And don't forget to put the smoke detector back up!)
December 15, 2011: One year ago, I celebrated my one-month anniversary in my new apartment by cooking in cast iron for the very first time. I've already talked about this pan here, my "redneck pan:" a Lodge 10-inch skillet with a huge Bass Pro Shops logo embedded in the bottom. At the urging of a close friend, I'd salvaged that pan from the top of a kitchen shelf in my old apartment, where it had sat unused since the day it was given to us. It was coated with eight years' worth of dust, and it was rusted all along the bottom. One year ago, I posted this message on Facebook:
AAAUUUGHHH! My "favorite way" was to poke and prod it and let out all the juices?!?! Well, that's what I wrote on that night…the night I was seduced into the cult of cast iron. So tonight, I celebrated my cast iron anniversary by cooking a steak in that very same pan. However, there was a difference between my cooking it a year ago and cooking it now. For starters, the "redneck pan" is well-seasoned and mostly black, the way a cast iron skillet should be. I'd selected my steak by cut – boneless rib eye. The method I used tonight was definitely NOT to "constantly poke and prod it with a fork." Instead, I prepared by marinating the steak with balsamic, as I heated up the oven (with the pan inside) to 500 degrees F. and turning the stovetop on to high. Just before putting it on the pan, I gave each side a coat of freshly ground pepper. I'd read a suggestion that salting your steak tends to dry it out if you let it sit, and supposedly you should apply kosher salt to the pan itself; so I gave that a try. The kosher salt blackened, of course, but it helped to put a nice crust on the steak.
And the steak hit the pan, filling my apartment with smoke. I'd prepared for this by taking down the smoke detector (mandatory with a lot of my cooking these days!). This was a thick piece of steak, so I seared it for 2 minutes 30 seconds on the first side, then flipped it and seared the other side for 2 minutes. I set the oven temperature down to 400 as the steak was searing, though it wouldn't drop to 400 immediately. Before putting it in the oven, I dropped a few mushrooms into the pan around the steak, to cook alongside; and I put the pan into the oven at 3 minutes for each side. Then out of the pan and onto a plate. I dropped a bit of balsamic into the pan to deglaze it, where it bubbled nicely, and scraped it all out of the pan and onto the steak; then came a foil tent and the agonizing ten minute wait. I sat down and began writing this message as I waited.
And the result was…WOW! I was afraid the blackened crust would give a burned taste to the steak. Anything but! The steak cut easily, and it was a good medium rare, with red in the center and a cooked layer around it. The taste was wonderful! The outer crust was very slightly crunchy, with NO burned taste at all, and a moist, tender interior bursting with juicy and meaty flavor. I didn't add any pepper at all, nor anything else to lessen the natural taste. The taste didn't need enhancement; I was thoroughly sated. The mushrooms were damn tasty, having cooked in the balsamic and and soaked up some of it. The end result of all this effort: in the same 20 to 25 minutes I spent poking and prodding at that steak last year, I came up with a seared meaty delight. I'm ecstatic at how this one turned out. It was a great way to celebrate my cast iron anniversary, by cooking what I think was the best steak I've ever cooked. So far.